For this weeks Christmas in July celebration I have designed and created some fun Christmas Sayings that can be used on holiday tags, cards, signs, etc. I included three holiday sayings multiple options for tags! The project I am sharing with this week is Christmas Wine Bottles. I added vinyl to some and then made tags for others. I hope you enjoy and can’t wait to see what you create!!
This weeks FREE Holiday Sayings and Tags can be found in the Freebie Library. File number is 41. I have also created a video tutorial along with some directions on how I made my bottles and some pointers! Remember to please share what you created! Check me out on Facebook and Instagram and remember a pintrest pin is always appreciated!!
Also, everything in the shop is 25% until Wednesday!!! No code is needed or anything!! The discount will be automatically applied!!! Enjoy!!
Christmas Sayings Supply List
- Cutting Machine and software
- Holiday Sayings and Tags (click on the link)
- Wine Bottle(s)
- LED Wine Bottle Lights
- Adhesive Vinyl in your color choice
- Hot Glue Gun and glue
- Rust-oleum Frosted Glass Spray paint – Walmart or Home Depot
- Christmas greenery and decorations
- Epson salt
- Modge Podge and brush or sponge
- Alcohol and cotton pad
- Parchment Paper
- Weeding tools, scissors, cutting knife, transfer tape etc
Video Tutorial – Holiday Sayings and Tags
Here are the steps I took to Christmas Sayings and Holiday Tag Wine Bottles
Step 1 – Spray your bottles with the Frosted Glass Spray paint. I put a glove on and held them by the neck and sprayed them outside. Then i just put them on parchment paper to dry.
Step 2 – If you want to do the snow effect on your bottles lets do that now. First lets mix our epson salt and glitter. I used a small container and put some salt in it and then added glitter. I did this all by look and appeal. Now use your glue gun and applied glue to the bottle. I used some tape to give my bottle a clean edge. Then applied the glue below it. It is easier to stand the bottle up and let gravity help with the drips. Now apply your first layer of epson\glitter. Once that is dry take your modge podge and sponge or brush and pounce over the top of the first layer and fill in your gaps (again check the video for the is). Once they are dry spray your glitter area with a clear sealer. I used Rust-Oleum 2x clear gloss.
Step 3 – Load the free cutting file into your favorite cutting software and size appropriately. For the tags I did you my Glowforge, however, most cutters can cut thin birch on them or chipboard.
Step 4 – Weed your vinyl. Then use your transfer tape to apply it to the vinyl. I did the larger wood first. Then I used parchment paper to align and layer the vinyl since I used two colors. I demo this in the video above.
Step 5 – Now apply your vinyl to the bottle. Lay the bottle on its side. Use your parchment paper to align where you want it to go. Then apply your vinyl. Once the vinyl is laid down carefully remove your transfer tape. If you are doing multiple bottles apply the rest of your vinyl.
Step 6 – Next take your twine and wrap it around the top of the bottle to cover the neck. Use a little hot glue at the top. Put the twine in it and wrap it around the bottle. When looping around over the tail and glue. Keep wrapping until you have the look you want.
Step 7 – Now take the greenery and cut it to the size you need. Put some glue on the bottom part of the twine and then put the greenery in it. Then wrap the twine around again to cover those ends. To finish add your berries and a twine bow or knot.
Step 8 – If you are using tags this is where i added mine. I used twine to tie the ends up. I found it was easier to do the smaller star first and then the larger tag.
Step 9 – Finally take your wine bottle lights. Feed the lights into the bottle. Turn on and enjoy your beautiful creation!
To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 41 – Christmas\Holiday sayings and tags The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.
I hope you enjoy the FREE files. Thank you again for stopping by and being part of my dream and 12 Paw Designs! Have an absolutely amazing day!!!
Remember to PIN IT!!! ?
Also, please check out my shop. I am always adding new designs.
If you have any questions or run into an issue please let me know!!!
Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns
DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.