Skip to content

Blog/Project Ideas
- Freebie Library
Shop
DIY Kits
DIY Paint Kit
Digital Files
Physical Goods

Tag: dxf

Boho Rainbow For Inspiration and the Mama’s in our life!
Boho Rainbow For Inspiration and the Mama’s in our life! I have designed some fun boho rainbows. I have added inspirational quotes and created a special rainbow mama with baby foot prints!! You can cut or do sublimation, etc. You can leave the leopard print on or take it off. Add one of the quotes and you have a design for you!!!

This weeks FREE SVG can be found in the Freebie Library as number 44 Boho Rainbow Inspiration\ Rainbow Mama. I am going to use the file and make a fun color change cup!! The video and steps are too are below.

Remember this would be adorable on a coffee cup, shirt, onsie, etc!!! Play and have fun!!! Please share what you have made too!!! I would also very much appreciate a pinterest pin!!!

Boho Rainbow Tumbler Supply List
- Cutting Machine and software
- Boho Rainbow FREE File (click on the link)
- Vinyl and Transfer tape of choice
- Weeding tools, scissors, cutting knife and parchment paper
- Color Changing tumbler – I found my at Walmart
- Alcohol and cotton pad
Boho Rainbow Video Tutorial

Here is some other Ideas!

Here are the steps I took make the my color changing Tumbler

Step 1 – Open the SVG file in your cutting software (note: if you have the free version of Silhouette studio you will need the DFX files). Size the file elements as need for the project you are making. I used weeding boxes to help me weed my vinyl. Cut your vinyl out. Make sure all your pieces are cut before ejecting from the cutting machine.

NOTE: You can do the leopard or not, the dots on the rainbow can be left off etc. Have fun with it!!

Step 2 – Use the alcohol and cotton pad and clean the surface of your cup. You want all the oils from hands, etc off of the cup. Set aside to dry.

Step 3 – Time to wee your vinyl. Because I was going on a cup my image was small. Somethings I needed to reverse weed. My transfer tape was pretty sticky and did not want to release my vinyl all the way. So there were a few spots where it took me a little longer to weed.

Step 4 – User your transfer tape parchment paper to line up your rainbow. I applied my my black leopard and dots after on the cup. However, I think it would have been way easier to do it before. So starting with the leopard and dots and apply to the rainbow strips. I used the parchment paper to line up my rainbows to make sure they were where I wanted them and attached it to the transfer tape. See video on how I did this.

Step 5 – Let’s apply our vinyl!!! I use one of my extra squeegees with the ridges to hold my cup. I took my transfer tape and applied it to the cup. Then I applied my words and your cup is done!!!

Step 6 – Add ice and your drink and watch the fun color change!

How to get your FREE Files

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! IT ALSO IS INCLUDED EVERY WEEK IN MY NEWSLETTER!!) and download Number 44 Boho Rainbow Inspiration\ Rainbow Mama. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I hope you enjoyed this tutorial and thank you again for stopping by and being part of my dream and 12 Paw Designs! Have an amazing week! Remember a ? Pintrest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

Also, follow me, links below, to see fun stuff I make through out the week. Items will be going into the shop!
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
July 30, 2021
Fun With Christmas Sayings and Tags!
For this weeks Christmas in July celebration I have designed and created some fun Christmas Sayings that can be used on holiday tags, cards, signs, etc. I included three holiday sayings multiple options for tags! The project I am sharing with this week is Christmas Wine Bottles. I added vinyl to some and then made tags for others. I hope you enjoy and can’t wait to see what you create!!

This weeks FREE Holiday Sayings and Tags can be found in the Freebie Library. File number is 41. I have also created a video tutorial along with some directions on how I made my bottles and some pointers! Remember to please share what you created! Check me out on Facebook and Instagram and remember a pintrest pin is always appreciated!!

Also, everything in the shop is 25% until Wednesday!!! No code is needed or anything!! The discount will be automatically applied!!! Enjoy!!

Christmas Sayings Supply List
- Cutting Machine and software
- Holiday Sayings and Tags (click on the link)
- Wine Bottle(s)
- LED Wine Bottle Lights
- Adhesive Vinyl in your color choice
- Hot Glue Gun and glue
- Rust-oleum Frosted Glass Spray paint – Walmart or Home Depot
- Christmas greenery and decorations
- Epson salt
- Glitter
- Modge Podge and brush or sponge
- Twine
- Alcohol and cotton pad
- Parchment Paper
- Weeding tools, scissors, cutting knife, transfer tape etc
Video Tutorial – Holiday Sayings and Tags

Here are the steps I took to Christmas Sayings and Holiday Tag Wine Bottles

Step 1 – Spray your bottles with the Frosted Glass Spray paint. I put a glove on and held them by the neck and sprayed them outside. Then i just put them on parchment paper to dry.

Step 2 – If you want to do the snow effect on your bottles lets do that now. First lets mix our epson salt and glitter. I used a small container and put some salt in it and then added glitter. I did this all by look and appeal. Now use your glue gun and applied glue to the bottle. I used some tape to give my bottle a clean edge. Then applied the glue below it. It is easier to stand the bottle up and let gravity help with the drips. Now apply your first layer of epson\glitter. Once that is dry take your modge podge and sponge or brush and pounce over the top of the first layer and fill in your gaps (again check the video for the is). Once they are dry spray your glitter area with a clear sealer. I used Rust-Oleum 2x clear gloss.

Step 3 – Load the free cutting file into your favorite cutting software and size appropriately. For the tags I did you my Glowforge, however, most cutters can cut thin birch on them or chipboard.

Step 4 – Weed your vinyl. Then use your transfer tape to apply it to the vinyl. I did the larger wood first. Then I used parchment paper to align and layer the vinyl since I used two colors. I demo this in the video above.

Step 5 – Now apply your vinyl to the bottle. Lay the bottle on its side. Use your parchment paper to align where you want it to go. Then apply your vinyl. Once the vinyl is laid down carefully remove your transfer tape. If you are doing multiple bottles apply the rest of your vinyl.

Step 6 – Next take your twine and wrap it around the top of the bottle to cover the neck. Use a little hot glue at the top. Put the twine in it and wrap it around the bottle. When looping around over the tail and glue. Keep wrapping until you have the look you want.

Step 7 – Now take the greenery and cut it to the size you need. Put some glue on the bottom part of the twine and then put the greenery in it. Then wrap the twine around again to cover those ends. To finish add your berries and a twine bow or knot.

Step 8 – If you are using tags this is where i added mine. I used twine to tie the ends up. I found it was easier to do the smaller star first and then the larger tag.

Step 9 – Finally take your wine bottle lights. Feed the lights into the bottle. Turn on and enjoy your beautiful creation!

How to get your FREE Holiday Sayings and Tags

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 41 – Christmas\Holiday sayings and tags The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I hope you enjoy the FREE files. Thank you again for stopping by and being part of my dream and 12 Paw Designs! Have an absolutely amazing day!!!

Remember to PIN IT!!! ?

12PD Holiday Sayings and Tag

Also, please check out my shop. I am always adding new designs.
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
July 8, 2021
My Favorite Color is Christmas Lights…
I’m so excited to bring to you Christmas in July!!! I love giving at Christmas so every week in July there will be a Christmas design!!! This week we are doing My Favorite Color is Christmas Lights. The free files have a regular files and i have setup a Rhinestone template version for you!!! Christmas lights are so bright and beautiful and i love looking at them!!

12PD My Favorite Color is Christmas Lights Rhinestones

This weeks FREE My Favorite Color is Christmas Lights can be used on a shirt, bag, sign, etc and the SVG/Cut files can be found in the Freebie Library. File number is 40. I have also created a video tutorial along with some quick directions below on how I made my shirt and some pointers! Remember to please share what you created! Check me out on Facebook and Instagram and remember a pintrest pin is always appreciated!!

My Favorite Color is Christmas Lights Supply List
- Cutting Machine and software
- My Favorite Color is Christmas Lights (click on the link)
- Rhinestoines – Hot fix
- Magic Flock and Rhinestone Transfer – I purchased mine from Rhinestone World
- Edging painting pad – used with the magic flock to get the Rhinestones into the holes.
- Heat Transfer Vinyl – for the light strand and the non-rhinestone words
- Heat press or Easy Press
- Weeding tools, scissors, cutting knife, etc
Video Tutorial – Christmas Lights Rhinestones

Here are the steps I took to make my Rhinestone Shirt

Step 1 – Now load your free file into your cutting software and cut out rhinestone templates from the magic flock. Remember not to re-size if you are doing rhinestones because it will affect the template. Make sure your cut settings are appropriate for your cutting machine. Weed your flock. I pulled the template off first. Important thing is that you want to keep the back down on something. So since i didnt have any vinyl backing left I used the backing from the magic flock. So i had to remove all the little dots. They are sticky and it took me a little bit.

Cutting notes….I used weeding boxes around my lights. So each light color was a separate flock template. For the words I did O O from color in one block and C L R in another. This gave me a great template for lining of my letters and it saved on flock. For LIGHTS I did L G T and I H S in a weeding block. I show this in the video.

Step 2 – Cut your light strand and words out of heat transfer vinyl. I used white since I was going on a dark grey shirt. Remember when cutting your vinyl that the shiney side down to the mat. Weed your vinyl

Step 3 – Let’s press our HTV to our shirt. Find the center of your shirt. I like to fold my in half and give a quick few seconds press. Once you have your fold lay the shirt down on the press. Now find the center of your HTV. I like to fold it in half. Once that is done put it on the shirt and press. Make sure you follow the temp and time that the vinyl recommends. Remove your transfer sheet.

Step 4 – Lets do rhinestones!!! I did this right at the press. I used a piece of parchment paper under the rhinestones and magic flock. It helped to make sure things did not stick where I did not want it to. Pour your stones on the flock and use the pad to move them around to fill the holes. Confirm all holes are filled and that they are going the correct direction. Then take your transfer tape and lay it over the rhinestones and press firmly to make sure all stones adhere. Carefully pull the transfers and stones from the template and put the white back on the transfer tape and rhinestones. I did all of one color at a time. So did red light bulbs and then the letters. Then i put the transfer tape over the letters and set them to the side. Press each color light to the shirt. I used the PNG file as my visual to make sure I had the lights in the correct location. Press. I did not press the full time. Just enough to get the stones to stick t the shirt. I did a full time press at the end. Repeat the process for all other colors.

Once the lights are all on I then pressed the words to the shirt.

IMPORTANT note!!! Once you’re done with your rhinestones separate the front and back of your shirt. The stones will try and glue through to all layers!!!

Enjoy your beautiful shirt!!!

How to get your FREE Christmas Lights Files

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 40 – My Favorite Color is Christmas Lights The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I hope you enjoy the FREE files. Thank you again for stopping by and being part of my dream and 12 Paw Designs! Have an absolutely amazing day!!!

Remember to PIN IT!!! ?

12PD My Favorite Color is Christmas Lights

Also, please check out my shop. I am always adding new designs.
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
July 1, 2021
Wipe Your Paws Welcome Mat!
Wipe your Paws Welcome door mat is a fun addition to any entry way! I have Included 2 fun designs for you. Once is Welcome, wipe your paws and the other is Welcome, Please leave by 9! However, don’t just think welcome mat! You can take Welcome and make signs, etc! there are so many possibilities!!

This weeks FREE welcome mat and sign SVG/Cut files can be found in the Freebie Library. File number is 39. I have also created a video tutorial along with some quick directions below on how I made my mat and some pointers! Remember to please share what you created! Check me out on Facebook and Instagram and remember a pintrest pin is always appreciated!!

Wipe Your Paws Supply List
- Cutting Machine and software
- Welcome Mat and sign (click on the link)
- Freezer paper – sorry, you can’t your wax paper
- Press and Seal
- Coir Mat – I purchased mine from Home Depot.
- Outdoor acrylic Paint – I purchased mine from #michaels
- Paint brush
- Spray sealer – Seal after you are done painting. I had some clear flexseal on hand
- Weeding tools, scissors, cutting knife, etc
- Heat sourse – iron, easy press, etc
- Push pins if you want – they would be used for the center of the letters.
Video Tutorial – Welcome Mat

Wipe Your Paws

Here are the steps I took to make the Welcome Mat

Step 1 – Open the SVG file in your cutting software (note: if you have the free version of Silhouette studio you will need the DFX files). I kept my size to 12×24 cutting mat.

Step 2 – Prep your mat. Put your freezer paper on the mat wax side down and cut out the design.

Step 3 – Once the design it cut leave it on the mat and weed out the letters. Remember, this is a stencil so you want to take out the areas where you are going to be applying paint.

Step 4 – Next, take your press and seal and your squeegee and apply it to the wax paper. I left it on the roll and use the squeegee to adhere and flatten as I go. Once i had it on I flipped the mat over and removed the mat from the freezer paper/press and seal.

Step 5 – Place the freezer paper\press and seal design on your mat. Position it where you want it to go. I did the paws separately so I placed my design lower on my mat. I then used heat to adhere the freezer paper. I did use a heat press. However, a board under the mat would have helped so that it doesn’t move on you and loosen the freezer paper. Once you have it on the mat where you want it to be. Peel back the press and seal so it will be out of the way of your heat source. I did 315 for a few seconds. Then, move onto the next area. For the centers of your letters you can use push pins or hold while you are painting them. Once everything is pressed down you can move onto painting.

Step 6 – Now take your outdoor acrylic paint and a brush and dab it into the mat. I was not stingy on paint. Make sure you keep your paint close to the area you are working on. I travel and it dropped. So take note…

Step 7 – One you are done painting and with the paint wet pull the freezer paper off. Then i did the paws. I did not heat set them since they were small.

Step 8 – Once your mat is dry i put a spray sealer on it. I had some clear flexiseal and used that.

Step 9 – Place by your entrance way or give as a gift and enjoy!!!!

How to get your FREE Files

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 39 – Welcome Mat and Sign. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I really hope you enjoy my welcome design and the mat we created! Remember a ? Pinterest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

12PD Welcome Sign and Mat

Also, please check out my shop. I am always adding new designs. You might also find ready made tumblers or some other goodies in there in the future!!!
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
June 25, 2021
Welcome Summer Sign Gives Your Porch A Citrus Burst!
Part 2 – This is the reverse side to Hello Spring!

Welcome Summer Sign Gives Your Porch A Citrus Burst! This is part 2 of the reversible porch sign we did earlier. If you missed it i have it linked above for you.

Welcome Summer\Hello Spring is made with a stained common\pine board. Then I used masking vinyl and painted this side. You could also paint this side of your board white or any color of your choosing!! The file is setup for 12″ x 60″. However, size it to the size you need. I ended up with 12″x48″ Have fun with the colors!

This weeks FREE Summer Porch Sign SVG/Cut files can be found in the Freebie Library. File number is 38. I have also created a video tutorial along with some quick directions below on how I made this FUN Welcome Summer Sign. I would love to see the color choices you used!

Welcome Summer Sign Supply List
- Cutting Machine and software
- Welcome Summer (click on the link)
- Masking Vinyl – I use Starmask from 143vinyl.com
- Pine\Common Board – Mine was 12″x48″ – I used the reverse side from Hello spring
- Stain color of Choice – only needed if you are going to stain or if you have not done Hello Spring
- Sand paper or sanding block
- Staining rag
- Paint color of choice
- Make-up sponges – get my from the Dollar Tree
- Spray sealer – Seal after you are done painting
- Weeding tools, scissors, cutting knife, transfer tape, etc
Video Tutorial – Let’s make a Summer Porch Sign!

Here are the steps I took to make the Welcome Summer Sign

Step 1 – Prep your board. If you are doing the reverse you should be set to go. However, if you decided you wanted paint vs stain you would do that now.

Step 2 – While everything is drying(if needed). Open the SVG file in your cutting software (note: if you have the free version of Silhouette studio you will need the DFX files). Size the sign according to the board you will be working with. Use your masking vinyl to cut out your design.

Step 3 – Once your stencil is cut weed your vinyl. Remember you ware weeding the parts you will be painting.

Step 4 – Arrange your pieces on your board. Remember that Summer will be down a little more more since Welcome goes at the top. You can make and apply as may citrus slices as you like!

Step 5 – Now to stencil paint your board. Since I stained my board I need white under the everything. So I did to coats of white and then stenciled my citrus slices in my colors. I found I needed to coats of that as well. Pull your stencils mask and clean up your slices.

Step 6 – Now apply Summer and welcome to the sign and repeat the paint process. Again, i needed white under summer. I used a color shifting paint for Summer. That took 4 coats before i felt I had good coverage. Once you have your last layer applied pull your stencil vinyl. Clean up any edges you might have.

Step 6 – Once your sign is completely dry spay it was a clear sealer of choice.

Step 7 – If you so desired you could add strips around the sign to give it an extra touch.

How to get your FREE Files

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 30 – Hello Spring Parch sign. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I really hope you enjoy part 2 or our reverse spring/summer porch sign. Remember a ? Pinterest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

12PD Welcome Summer Citrus

Also, please check out my shop. I am always adding new designs. You might also find ready made tumblers or some other goodies in there in the future!!!
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
June 19, 2021

1 2 3 … 5

12 Paw Designs

From concept to creation

Blog
About
FAQs
Authors

Events
Shop
Patterns
Themes

Twenty Twenty-Five

Designed with WordPress

✕