Happy Sunday Funday! So let’s have some fun with these Heart Lines Freebie File cutting file to start our week off! I have designed 4 cut files for you in this bundle. The design is Heart Lines that I then added either the word Love with hearts, a Heart with a paw print (you can leave the paw off too!), a paw print or plain. Let your creativity go!!! You will also see the project I made with the Love cut file and the steps I took to create it. To get your file head over to the Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!!) and download Number 7! Also, I would appreciate the Pinterest save! That helps me so that I can keep sharing free files!! You can also follow me on Instagram, Facebook and Pinterest!
To start with I use a Dollar Tree sign I bought at halloween time. It is 6″x6″ in size. I pealed the paper word part off and then gave it a good sanding to get everything off. Next I used chalk paint and applied 2 coats on it. You can use acrylic paint as well or whatever you have at home. I did do a light sanding between coats. Next I took some painters tape and placed it on the board about 1 ½” apart and painted those stripes black. It also would have been cute in grey! Again, let the creativity go!!! While the black was still wet I peeled the tape off to make sure to help eliminate bleed. Below i have my initial steps.
Next I uploaded my file into my favorite cutting software. I ungrouped the heart i was going to use and then picked my colors. I used red glitter for the heart, pink for LOVE and the heart base and then white glitter vinyl for the hearts on top. I like to save time and cut my 2 glitter vinyls together and then cut my glossy vinyl. Cut out your vinyl and then weed out the pieces you don’t want. If you noticed on the red glitter, I cut out the extra before weeding so i could save some for a future project. Once I had everything weeded I then needed to grab a stickier transfer paper for the glitter vinyl. I then applied my vinyl to the sign. You want to make sure your sign is nice and dry. I will let mine sit over night. However, I am normally impatient and I will use a heat gun, hair dryer or put it in front of the heater or fireplace (I live in Wisconsin). I applied the heart first, then Love and then the white glitter hearts on top.
Then to finish it off I added a messy bow. A mess bow is layered cut ribbon on top of each other and tie in the center. I then glued it onto the sign.
Please share what you make with these files! I love to see the creativity!!!
Here are some other ideas for you!
Also, check out the shop for other fun design files. I upload some great new Valentine designs. Have a suggestion for a design??? Let me know!
If you have any questions or run into an issue please let me know!!!
Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns
DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.