12 Paw Designs

Tag: dxf

  • Hello Spring Sign will Make your Porch Blossom!

    Hello Spring Sign will Make your Porch Blossom!

    Part 1 – Hello Spring will be a reversible sign!

    12PD Hello Spring Porch

    Hello Spring Sign will Make your Porch Blossom!! As an added bonus this is going to be part 1! Yes! Part 1. This is going to be a reversible sign. There will be a Welcome Summer side coming soon!!!!

    Hello Spring Sign is made with a stained common\pine board. Then I used permanent adhesive on it. The file is setup for 12″ x 60″. However, size it to the size you need. I ended up with 12″x48″ Have fun with the colors!

    This weeks FREE SVG/Cut files can be found in the Freebie Library. File number is 30. I have also created a video tutorial along with some quick directions below on how I made this FUN Hello Spring Sign. I would love to see the color choices you used!

    Hello Spring Supply List

    • Cutting Machine and software
    • Hello Spring Porch Sign (click on the link)
    • Permanent Vinyl of your Choice – I use Starcraft from 143vinyl.com
    • Pine\Common Board – Mine was 12″x48″
    • Stain color of Choice
    • Sand paper or sanding block
    • Staining rag
    • Parchment Paper
    • Spray sealer – **Important** Seal after you stain and before you place your vinyl
    • Weeding tools, scissors, cutting knife, transfer tape, etc

    Video Tutorial – How to make your Porch Blossom!

    • 12PD Hello Spring Porch Blossom
      Hello Spring Porch Sign SVG – Hello Spring Cut File – Cricut Silhouette – svg/dxf/png/eps – Digital Download
    • 12PD Hello Spring Porch Blossom
      Hello Spring Porch Sign SVG – Hello Spring Cut File – Cricut Silhouette – svg/dxf/png/eps – Digital Download
    • 12PD Hello Spring Porch Blossom
      Hello Spring Porch Sign SVG – Hello Spring Cut File – Cricut Silhouette – svg/dxf/png/eps – Digital Download

    Here are the steps I took to make the Hello Spring Sign

    Step 1 – Prep your board. My lovely husband sanded and then stained my board for me. Remember when staining less is more. The more stain you use the longer it takes to dry. Once the board is dry I sprayed a few coat of clear sealer. I normally like 2x by rustoleum, howevere, I was out. I found a clear coat. It was totally fine to use. I just had a few areas that I must have been heavy handed when I sprayed and the vinyl did not want to come off at first. It was not a problem in the end!!!

    Step 2 – While everything is drying. Open the SVG file in your cutting software (note: if you have the free version of Silhouette studio you will need the DFX files). Size the sign according to the board you will be working with. Pick your fun vinyl colors and cut everything out. For the butterflies I used 2 colors, a darker body and lighter wings.

    Step 3 – Once your adhesive is cut weed your vinyl. Then apply your transfer tape.

    Step 4 – Arrange your pieces on your board. I found that it was easier to put Hello on first. I found the middle of the word and board and placed it. Then it was easier to place the rest. Remember to use the picture to help. I started in the middle and worked my way to the outer edges. I used the parchment paper to help with the centering and placement. Pull the backing off of the adhesive letter. Then place your vinyl and transfer tape on the parchment paper. Leave some of your transfer tape exposed so you can adhere it to the board. You will see in the video how i did that. Once you have it in the place you want it apply the top of the transfer tape. Then slide your parchment paper out. Finish adhering the letter and then carefully remove your transfer tape.

    Step 5 – Repeat step 4 until you have everything applied to your board. I did let my board sit in the house for a day before putting it outside to make sure everything was ok.

    How to get your FREE Files

    To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 30 – Hello Spring Parch sign. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS. 

    I really hope you enjoy part 1. Watch for part 2, Welcome Summer to be coming soon!!! Remember a ? Pinterest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

    Also, please check out my shop. I am always adding new designs. You might also find ready made tumblers in there in the future!!! There might be a few extra keychains that show up there too!!
    https://12pawdesigns.com/shop/

    If you have any questions or run into an issue please let me know!!!

    Lorri?
    Lorri@12PawDesigns.com

    Let’s Conntect!

    Want to connect more with 12 Paw Designs???:
    • Website: https://12pawdesigns.com
    • FB Page: https://www.facebook.com/12pawdesigns/
    • Instagram: https://www.instagram.com/12pawdesigns/
    • Pinterest: https://www.pinterest.com/12PawDesigns

    DO NOT resell any of the files as digital download or any other form.
    DO NOT claim the files as your own.
    DO NOT modify and resell the files in any form.

  • Exploding Graduation Gift Card Holder

    Exploding Graduation Gift Card Holder

    12PD Graduation Gift Card Explosion Box

    EXPLODING GRADUATION GIFT CARD HOLDER! This year we have two amazing young women graduating from college. I wanted to make a card, however, not just any card I thought..hmmm…..what about and Exploding Graduation Card??? So I thought I would share it with you.

    I even designed the file with score marks in. So it goes fairly quickly to assemble. My Cricut users will see the score option when you import the SVG file. My Silhouette users will need to do a quick group on the score lines and the layers and you will be good to go! I have also setup the file so you can use 8 ½ x 11 or 12. I also made the tassel and show you quick and easy it is.

    This weeks FREE SVG/Cut files can be found in the Freebie Library. File number is 29. I have also created a video tutorial along with some quick directions below on how I made the gift card holder. Have fun and share your creativity! I would love to see the color choices you used!

    Graduation Gift Card Holder Supply List

    • Cutting Machine and software
    • Exploding Graduation Gift Card Holder (click on the link)
    • Card stock of your choice – I used
      • Black Textured Cardstock – You can choose their school colors
      • Yellow Cardstok – Again, use school colors
      • Pattern Cardstock of choice
    • Black Vinyl
    • DMC Floss – For making the tassel
    • Weeding tools, scissors, cutting knife, transfer tape, foam dots or tape, and adhesive of choice

    Video Tutorial – How to make the Gift Card

    • 12PD Graduation Gift Card Holder
      Graduation Gift Card Holder SVG – Explosion Card File – Cricut Silhouette – svg/dxf/png/eps – Digital Download
    • 12PD Graduation Gift Card Explosion Box
      Graduation Explosion Card SVG – Explosion Card File – Cricut Silhouette – svg/dxf/png/eps – Digital Download

    Here are the steps I took make the Graduation Gift Card Holder

    Step 1 – Open the SVG file in your cutting software (note: if you have the free version of Silhouette studio you will need the DFX files). Make sure the size comes in as 14×14. If not size it accordingly before doing anything. Cricut users I have the score lines set for you so when you import they will be there. Silhouette users you will need to group the score lines with the object. The objects below are the one you need to do. I put the score lines in red for you. The 3 vertical lines attach to the blue gift card holder. Then the other red lines are for the box top and the box bottom. Also for Silhouette users i used a blade of 1 and a force of 4 for the score lines. Note: if you are using textured card stock i would put the texture to the mat so that the score happens on the back side. Cricut users if you do not have a score blade its ok, use a ruler to help bend them up. Cut your material.

    • Money Holder Score lines
      Money Holder Score lines
    • Box Top Score lines
      Box Top Score lines
    • Box Bottom Score lines

    Step 2 – Box bottom – After everything is cut out weed your vinyl words. Then take the box bottom and bend the flaps back and forth it will help with the “explosion”. We want to attach the gift card holder piece first. Fold it in half and the fold at the tabs. Add your adhesive and attach. You want to keep the 2 sides close to each other so that the gift cards holds in there. Plus your pattern paper has to go over the top. So one the gift card holder is in place attach your decorative piece over it to hide the tabs. Next attach your panels to the flaps. I used for solid colors for the words and 2 patten pieces. However, you can do all solid colors. Once that is done use your transfer tape and lay down your words to the card.

    Step 3 – Box Top – Now fold the box top panels in and the tabs. Add your adhesive to the tabs and attach to the panel next to it. This will form the box top.

    Step 4 – Attach the mortar board to the top of the box top with your adhesive. Then attach the button to the mortar board with a foam square.

    Step 5 – Tassel – Lets make the tassel. They are quick and easy to do. I use embroidery floss to make mine. I took the floss and wrapped it around 3 fingers 10 to 12 times. Then I slide the hanger piece of floss through the circle of floss. Now, take a smaller piece of floss and wrap it around your floss bundle. Keep it towards the top of the bundle by your hanger piece of floss. I wrapped it around the floss bundle 3 or 4 times and then pulled it tight and tied a knot. Trim up you edges and cut the ends on the bundle opposite from the hanger. You know have a super cute tassel!

    Step 6 – Attach your tassel. Make sure your box is put together so you can place your tassel appropriately. On the hanger strand I flipped the ends over 1 time, then put it under the button. Then I checked the length and position. Once i was happy with that i finished the knot. Now look at how cute your box is!!!! I hope you have a grad at any level to share this cute gift with!!!

    How to get your FREE Files

    To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 29 – Graduation Exploding Gift Card. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS. 

    Enjoy the gift holder! I hope you have a grad you can share it with! They were a lot of fun to design and make. Remember a ? Pinterest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

    Also, please check out my shop. I am always adding new designs. You might also find ready made tumblers in there in the future!!! There might be a few extra keychains that show up there too!!
    https://12pawdesigns.com/shop/

    If you have any questions or run into an issue please let me know!!!

    Lorri?
    Lorri@12PawDesigns.com

    Let’s Conntect!

    Want to connect more with 12 Paw Designs???:
    • Website: https://12pawdesigns.com
    • FB Page: https://www.facebook.com/12pawdesigns/
    • Instagram: https://www.instagram.com/12pawdesigns/
    • Pinterest: https://www.pinterest.com/12PawDesigns

    DO NOT resell any of the files as digital download or any other form.
    DO NOT claim the files as your own.
    DO NOT modify and resell the files in any form.

  • Time to Make the Mandalas!

    Time to Make the Mandalas!

    Mandalas MOM LOVE 5x7 FREE

    TIME TO MAKE THE MANDALAS! That’s right this week not only do I have one Mandala to share I have two!!!! I designed a Mom and Love file and I used them to make cards. With Mother’s Day around the corner I thought you might need a card. Then it’s that time of year for weddings, anniversaries, etc so the love card will come in hand. Or…surprise your significant other!!

    The mandalas have 6 layers to them. However, the bottom layer is solid so I just used my card base for it. If you need a different color you can cut that out too!! I used some beautiful Recollections Paper from #michaelstores. They had a really fun foil cardstock I used for the second layer that really made Mandala pop!

    This weeks FREE SVG files can be found in the Freebie Library. File numbers are 26 and 27 I have also created a video tutorial along with some quick directions below on how I made the cards. Have fun and share your creativity! I would love to see the color choices you used!

    Time to Make the Mandalas Supply List

    Video Tutorial – Time to Make the Mandalas

    • Mandala / Mandalas Love 5x7
      Love Mandala SVG – Mandala Cut File – Cricut Silhouette – svg/dxf/png/eps – Digital Download
    • Mandala MOM LOVE 5x7 FREE
      Mom and Love Mandala SVG – Mandala Cut File – Cricut Silhouette – svg/dxf/png/eps – Digital Download
    • Mandala MOM 5x7
      Mom Mandala SVG – Mandala Cut File – Cricut Silhouette – svg/dxf/png/eps – Digital Download

    Here are the steps I took make the Mandalas

    Step 1 – Open the SVG file in your cutting software (note: if you have the free version of Silhouette studio you will need the DFX files). The files should come in at 5×7. However, if you need to resize them just put them to 5×7 and you are good to go! Make sure all your pieces are cut before ejecting from the cutting machine.

    Step 2 – After everything is cut go ahead and weed your cardstock. One think to note: On the Mom file the O is separate. So make sure you grab that too!

    Step 3 – Once you have your cardstock layers all set to go lets assemble the cards. Using your adhesive of choice, I used a tape runner, attach the layers to each other. If you want a more 3D effect you can use foam squares. These are going in the mail so I choose not to do that part. The easiest is to start from the bottom up. So take your card base and cut that 7 by 10 and fold in half to get a 5×7 card. Then attach layer your bottom layer to the card. Then attach the next layer and so on until you have it all assembled. If you are doing the Mom card make sure to attach the O. 😉

    Step 4 – Admire what a great job you did and share it with someone special!!!

    How to get your FREE Files

    To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!!) and download Number 26 Mom Mandala or 27 Love Mandala. Or heck! Download them both!!!! The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS. 

    I hope you enjoyed Mandalas tutorial and files! They were a lot of fun to design and make. Remember a ? Pinterest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

    Also, please check out my shop. I am always adding new designs. You might also find ready made tumblers in there in the future!!! There might be a few extra keychains that show up there too!!
    https://12pawdesigns.com/shop/

    If you have any questions or run into an issue please let me know!!!

    Lorri?
    Lorri@12PawDesigns.com

    Let’s Conntect!

    Want to connect more with 12 Paw Designs???:
    • Website: https://12pawdesigns.com
    • FB Page: https://www.facebook.com/12pawdesigns/
    • Instagram: https://www.instagram.com/12pawdesigns/
    • Pinterest: https://www.pinterest.com/12PawDesigns

    DO NOT resell any of the files as digital download or any other form.
    DO NOT claim the files as your own.
    DO NOT modify and resell the files in any form.

  • Time for Some Teacher Appreciation!

    Time for Some Teacher Appreciation!

    12PD Teacher Appreciation

    TIME FOR SOME TEACHER APPRECIATION! It’s that Time of year where we need to show our Teachers some Appreciation! This weeks FREE SVG can be found in the Freebie Library. In the file there are 5 options for you. Two of the options can actually be used for a teach gift or something else. I have also created a video tutorial along with some quick directions below on how I made the journal, the adorable pencil keychains and the wine glass. I picked up the journal at Dollar General and the wine glass as Dollar Tree. The keychain supplies will be in the supply list below. Also in the video I talk about some other ideas for some more gifts for your favorite teacher along with possible for mom! I start the video off with this, then we make the journal, the keychains and finally the wine glass. Let your creative go and have fun with it. Have fun and share your creativity!

    I will also be adding a few new teach files in the store too!! There will also be some baseball and softball ones coming too!!!

    Teacher Appreciation Supply List

    Please note there are affiliate links in the supply list. There is no extra cost to you for using these links it just helps me to keep brining you free content! Thank you for your support,

    Time for Some Teacher Appreciation Video Tutorial

    Here is some Teacher Appreciation Ideas!

    12PD Teacher Appreciation
    12PD Teacher Appreciation

    Here are the steps I took make the Teacher Appreciation Gifts

    Step 1 – Open the SVG file in your cutting software (note: if you have the free version of Silhouette studio you will need the DFX files). Size the file elements as need for the project you are making. I used weeding boxes to help me weed my vinyl. This is especially important when doing the key chains. Cut your vinyl out. Make sure all your pieces are cut before ejecting from the cutting machine.

    Step 2 – I started with the journal and cut those pieces first. Then while the keychain vinyl was cutting I worked on the journal. Weed your vinyl. Once that is done take your transfer tape and apply it to the vinyl. Then I used parchment paper and applied my vinyl\transfer to that. Decided where i wanted it placed and then removed the parchment paper and squeegee down the vinyl. I did this same step for the second word and the applied my accents.

    Step 3 – Now for the keychains. I cut the wands off of the lip gloss tubes. Then I removed the eraser for the top. I took a small about amount of E6000 and applied it to the top and put the eraser back on the top. Let dry. I then took the baby oil and glitter (make sure your glitter is ready to use) I put the baby oil in the tube. Do not fill it up all the way. Then add your glitter. I used a piece of paper underneath to help with clean up. Now…there is such a thing as too much glitter!! You want them to galaxy float. Now decide if you need any more oil. I need a little air bubble at the top. The tubes I recommend have a plug that comes with them. BONUS! I put the plug in and then added some E6000 glue and put the cap on. You want to glue them shut to make sure you dont have an accident! Once this is done wipe your pencils with alcohol and cotton pad to get off any left over glitter and stuff. Let dry.

    Step 4 – Now weed your vinyl. Lessons learned. The bigger words you can weed easily. However, the smaller ones were a bugger! Reverse weeding did help a little, however, I applied the vinyl with weeding box to the pencil and then weeded it. Be careful not to scratch them though Once I figured this out it went relatively quickly.

    Step 5 – Now to finish the key chains. Take your needle nose and eye screw and attach it to the top. You want to make sure you go into the metal of the cap for good hold. I then opened the eye screw and fed in the key chain. Closed off the screw. Next take your jump ring and attach to the jump ring at the top. Add you tassel and apple charm. Close your ring. Now admire how stinking cute they are!!!

    Step 6 – Wine Glass. Cut out your vinyl. While that is cutting I took the glass, alcohol and the cotton pads and cleaned the glass. Let dry. Weed your vinyl. Once that is done I actually put the words together before applying to the glass. I used parchment paper again to line everything up. Then used parchment paper to apply the vinyl to the glass. Add your accents. How is is that!!! It’s so cute and fun!!

    How to get your FREE Files

    To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!!) and download Number 25 Family Word Search. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS. 

    I hope you enjoyed this tutorial and thank you again for stopping by and being part of my dream and 12 Paw Designs! Have an amazing week! Remember a ? Pintrest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

    Also, please check out my shop. I am always adding new designs. You might also find ready made tumblers in there in the future!!! There might be a few extra keychains that show up there too!!
    https://12pawdesigns.com/shop/

    If you have any questions or run into an issue please let me know!!!

    Lorri?
    Lorri@12PawDesigns.com

    Let’s Conntect!

    Want to connect more with 12 Paw Designs???:
    • Website: https://12pawdesigns.com
    • FB Page: https://www.facebook.com/12pawdesigns/
    • Instagram: https://www.instagram.com/12pawdesigns/
    • Pinterest: https://www.pinterest.com/12PawDesigns

    DO NOT resell any of the files as digital download or any other form.
    DO NOT claim the files as your own.
    DO NOT modify and resell the files in any form.

  • Word Search Time!

    Word Search Time!

    12PD Family Word Search

    I love games!!! I love to take time out to do a Word Search especially. So I thought I would so do something different and make a Family Word Search SVG Cut File. I even did a brush stroke behind all the words to you can hang it on, etc. This is a free file in the Freebie Library. I have also created a video tutorial along with a directions below on how I made my sign. The sign I am using I bought at the Dollar Tree. So it is a fun and inexpensive project to do! However, let your creative go and have fun with it. You could print it on vellum or a transparency too!! I also thought it would be super cute on a chalk board!!! Have fun and share your creativity!

    Family Word Supply List

    • Cutting Machine and software
    • Family Word Search Cutting Files from the Library (click on the link)
    • Vinyl– I used Starcraft for the black vinyl and the shimmering vinyl is StyleTech 2000 Ultra Glitter – 160 Sea Foam Green from 143vinyl (link is here)
    • Weeding tools, scissors, cutting knife, painters tape, parchment paper and transfer tape
    • Sign blank – I purchased my from the Dollar Tree #dollartreediy 
    • Alcohol
    • Acetate
    • Cotton Pads

    Family Word Search Video Tutorial

    I would like to note at 45 second in the video I go through how to pull it into Cricut Design space. At 4:45 I work in Silhouette Studio.

    Here is some more Inspiration!

    12PD Family Word Search
    12PD Family Word Search
    12PD Family Word Search
    12PD Family Word Search

    Here are the steps I took make the Word Search

    Step 1 – Open the SVG file in your cutting software (note: if you have the free version of Silhouette studio you will need the DFX files). Again, I would like to note at 45 second in the video I go through how to pull it into Cricut Design space. At 4:45 I work in Silhouette Studio. Size your cut file to the size of blank you are using. I am using a 7×7 Sign from the Dollar Tree. Since i was using a glass blank i reversed the paint stroke so you would adhere to the glass from the back side. If you are laying your letters on top of the brush strokes you will not have to do this. Also, I used weeding boxes around my elements. For the word search portion I easily could have used more to make the weeding process easier. Cut your vinyl out. Make sure all your pieces are cut before ejecting from your cutting machine.

    Step 2 – While our vinyl is cutting lets prep our blank. I used acetone and cotton pad to remove the saying on the sign. I did a acetone, swipe, fold pad, acetone, wipe, etc technique. Otherwise it smears it and takes longer to clean. Once that was done I use alcohol on a cotton pad and wiped the glass. I do this to make sure I get a nice clean surface. Set aside to dry.

    Step 3 – Now that everything is cut lets weed our vinyl. I was using an Ultra glitter and it was thicker. I needed to adjust my settings a little more because while it did cut it could have used another pass or a little more force for a cleaner cut. I ended up doing a reverse weed on the paint strokes to weed my vinyl. When weeding the word search letters I found it was easier for me to weed bottom up. I also pulled the vinyl back to 90 degrees and slowly slid it up. I also periodically cut off the extra vinyl. There were a few spots that I lost a few letters, however, no big deal. Cut some extras out and put them on the backing. I could see the indents so it made it easy to place them. The font is also whimsical enough that it does not have to be perfect. I used a pin pen to get the centers out of the tiny letters. It worked perfect!

    Step 4 – Once you have everything weeded lets apply the vinyl. I used the hinge method. This is where I laid my transfer down. Positioned where I wanted it and then used a piece of painters tape across the center of it. Then I lifted half away from the backing. Cut the backing off and placed and squeegee it down. The repeat for the other half. It made it really easy to get a good clean placement. Remove your transfer tape. Again, I pulled it back on itself to help pull it off. If I found an area that didn’t stick push that area down and rub it on. Next put family down, squeegee and remove the transfer tape.

    Step 5 – Now for the paint strokes. Since it was going on the back of the glass i grabbed a piece of parchment paper and attached the paint stroke to that leaving transfer tape exposed on the top. Then I could slide it around until I had the placement i wanted. Attached that top transfer tape piece. Lifted up the transfer tape and removed the parchment paper. Then laid down the transfer tape and squegee down. Remove your transfer tape.

    Step 6 – Admire your work! You did an amazing job!!!

    How to get your FREE Files

    To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!!) and download Number 25 Family Word Search. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS. 

    I hope you enjoyed this tutorial and thank you again for stopping by and being part of my dream and 12 Paw Designs! Have an amazing week! Enjoy every minute!! Remember a ? Pintrest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

    Also, please check out my shop. I am always adding new designs. You might also find ready made tumblers in there in the future!!!
    https://12pawdesigns.com/shop/

    If you have any questions or run into an issue please let me know!!!

    Lorri?
    Lorri@12PawDesigns.com

    Let’s Conntect!

    Want to connect more with 12 Paw Designs???:
    • Website: https://12pawdesigns.com
    • FB Page: https://www.facebook.com/12pawdesigns/
    • Instagram: https://www.instagram.com/12pawdesigns/
    • Pinterest: https://www.pinterest.com/12PawDesigns

    DO NOT resell any of the files as digital download or any other form.
    DO NOT claim the files as your own.
    DO NOT modify and resell the files in any form.