Category: Glowforge

Boho Rainbow For Inspiration and the Mama’s in our life!
Boho Rainbow For Inspiration and the Mama’s in our life! I have designed some fun boho rainbows. I have added inspirational quotes and created a special rainbow mama with baby foot prints!! You can cut or do sublimation, etc. You can leave the leopard print on or take it off. Add one of the quotes and you have a design for you!!!

This weeks FREE SVG can be found in the Freebie Library as number 44 Boho Rainbow Inspiration\ Rainbow Mama. I am going to use the file and make a fun color change cup!! The video and steps are too are below.

Remember this would be adorable on a coffee cup, shirt, onsie, etc!!! Play and have fun!!! Please share what you have made too!!! I would also very much appreciate a pinterest pin!!!

Boho Rainbow Tumbler Supply List
- Cutting Machine and software
- Boho Rainbow FREE File (click on the link)
- Vinyl and Transfer tape of choice
- Weeding tools, scissors, cutting knife and parchment paper
- Color Changing tumbler – I found my at Walmart
- Alcohol and cotton pad
Boho Rainbow Video Tutorial

Here is some other Ideas!

Here are the steps I took make the my color changing Tumbler

Step 1 – Open the SVG file in your cutting software (note: if you have the free version of Silhouette studio you will need the DFX files). Size the file elements as need for the project you are making. I used weeding boxes to help me weed my vinyl. Cut your vinyl out. Make sure all your pieces are cut before ejecting from the cutting machine.

NOTE: You can do the leopard or not, the dots on the rainbow can be left off etc. Have fun with it!!

Step 2 – Use the alcohol and cotton pad and clean the surface of your cup. You want all the oils from hands, etc off of the cup. Set aside to dry.

Step 3 – Time to wee your vinyl. Because I was going on a cup my image was small. Somethings I needed to reverse weed. My transfer tape was pretty sticky and did not want to release my vinyl all the way. So there were a few spots where it took me a little longer to weed.

Step 4 – User your transfer tape parchment paper to line up your rainbow. I applied my my black leopard and dots after on the cup. However, I think it would have been way easier to do it before. So starting with the leopard and dots and apply to the rainbow strips. I used the parchment paper to line up my rainbows to make sure they were where I wanted them and attached it to the transfer tape. See video on how I did this.

Step 5 – Let’s apply our vinyl!!! I use one of my extra squeegees with the ridges to hold my cup. I took my transfer tape and applied it to the cup. Then I applied my words and your cup is done!!!

Step 6 – Add ice and your drink and watch the fun color change!

How to get your FREE Files

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! IT ALSO IS INCLUDED EVERY WEEK IN MY NEWSLETTER!!) and download Number 44 Boho Rainbow Inspiration\ Rainbow Mama. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I hope you enjoyed this tutorial and thank you again for stopping by and being part of my dream and 12 Paw Designs! Have an amazing week! Remember a ? Pintrest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

Also, follow me, links below, to see fun stuff I make through out the week. Items will be going into the shop!
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
July 30, 2021
Happy Christmas in July with a Christmas Tiered Tray
Happy Christmas in July with this cute Christmas Tiered Tray! Let’s finish our Christmas in July with some really cute items for our tiered trays. This week our Christmas Svg include items to make stacked books (I did “faux book”), rolling pin, Santa Banner, Letter to Santa, WISH Scrabble tiles, and a holly berry tag to add to your bead garland.

This weeks FREE Christmas Tiered Tray can be found in the Freebie Library. File number is 43. I have also created a video tutorial along with some directions on how I made my items and some pointers! Remember to please share what you created! Check me out on Facebook and Instagram and remember a pintrest pin is always appreciated!!

Christmas Tiered Tray Supply List
- Cutting Machine or Glowforge and software
- Christmas Tiered Tray (click on the link)
- Wood or blanks. For blanks Dollar tree has some great options. Repurpose a 6×6 sign, wood blanks, etc. For the Banner you could use chipboard, cardstock, etc
- 4 Tumble Tower block from the Dollar Tree (Scrabble Tile tray)
- 4 Scrabble Tiles – You can use the Dollar Tree 3 in 1 game or purchase tiles from Walmart
- Mini Rolling Pin – I purchased from Amazon
- Wood for the Glowforge that is prepped (masked) if you are using a Glowforge
- Adhesive Vinyl in your color choice if you are doing vinyl
- Gorilla Super Glue Gel
- Hot Glue Gun and Glue
- Paint and brush – I used White, Red and Green
- Paint Pens – I used Posca and/or Arteza
- Ribbon
- Beads – I found mine painted at Hobby Lobby during a sale. You can also buy some from Amaozon
- Twine\Jute
- Weeding tools, scissors, cutting knife, transfer tape etc
Video Tutorial – Christmas Tiered Tray – Christmas SVG

Here are the steps I took to make the Christmas Ornaments

Step 1 – Load the free cutting file into your favorite cutting software. For Cricut and Silhouette I set mine to 12×12. I used the Glowforge, however, most cutters can cut thin birch or chipboard (check your cutting machine). In the video I show some options for blank ideas as well!!!

Step 2 – Cut your wood or vinyl. On the Glowforge you need to mask your wood with paper transfer tape to protect from scorching. Also, you can paint your board ahead of time to save on painting later!!!

Step 3 – Once you have your wood or vinyl cut do your weeding. For the Glowforge that means removing the mask from the wood. I found the Gorilla duct tape works amazing!!! You can also use weeding tools, pin pen, etc

Step 4 – Paint your items. I use the Posca paint pens for the small items. They are quick and easy!! Tweezer helps hold it as well while you paint. For the larger items I used acrylic paint. For the scrabble tray glue 2 tiles together end to end. Do this for the other 2 tiles also. Then glue them together to form your tray. Then I painted mine green. For the stacked books, i made a box with a fake front to look like books. However, you can use a mini crate for the dollar tree or their mini bibles and wrap with cardstock or vinyl!

Step 5 – Time to glue our items together. I use Gel super glue. However, they make 3m tape that you can place on the back of the board to make it super easy to put on your wood. I followed the PNG file that is included in your file download for placement, etc. I also show all of this in the video.

Step 6 – Finishing touches….

Tag\beads – I used twine to thread my beads onto my tag. Then made a tassel to hang from the other end. Again, please check out the video for the demo. Then I glued a bow onto the front.

Scrabble tray – Glue your tiles onto your scrable tray

Letter to Santa – Attach your letters, stamp and sign. If the letters are to small for you to weed make a sticker!!! Or print on cardstock and glue on!!

Banner – I used red and white twine from hobby lobby and strung my little banners onto that.

Rolling pin – I wrapped that with a piece of twine to add that extra touch.

Step 9 – How cute did your pieces turn out!?!?! Please share on on my social media so I can see!!!

How to get your FREE Christmas Tiered Tray File

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 43 – Christmas Tiered Tray The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I hope you enjoy the FREE files. Thank you again for stopping by and being part of my dream and 12 Paw Designs! Have an absolutely amazing day!!!

Remember to PIN IT!!! ?

12PD North Pole Tiered Tray

Also, please check out my shop. I am always adding new designs.
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
July 24, 2021
Time to Deck the Halls Christmas Ornaments
Merry Christmas in July!!! So that means it’s time to Deck the Halls with some new Christmas Ornaments!!! I took some Wood Slice Ornaments and add some fun sayings and accents. They are sure to spruce up your Christmas Decorations!

I did my project with my Glowforge (if you would like more information on this please let me know). However, you can totally use vinyl. Also, with the proper blades you can also cut chipboard or wood on some of the cutters (please check your machine options for this).

This weeks FREE Christmas Ornaments can be found in the Freebie Library. File number is 42. I have also created a video tutorial along with some directions on how I made my ornaments and some pointers! Remember to please share what you created! Check me out on Facebook and Instagram and remember a pintrest pin is always appreciated!!

Christmas Ornaments Supply List
- Cutting Machine or Glowforge and software
- Christmas Ornaments\Wood Slice Ornaments (click on the link)
- Wood Slices
- Wood for the Glowforge that is prepped (masked) if you are using a Glowforge
- Adhesive Vinyl in your color choice if you are doing vinyl
- Gorilla Super Glue Gel
- Hot Glue Gun and Glue
- Paint and brush – I used White and Black
- Paint Pens – I used Posca and/or Arteza
- Ribbon
- Beads – I bought mine off of amazon
- Twine\Jute
- Weeding tools, scissors, cutting knife, transfer tape etc
Video Tutorial – Christmas Decorations – Wood Slice Ornaments

Here are the steps I took to make the Christmas Ornaments

Step 1 – Load the free cutting file into your favorite cutting software and size appropriately. I used the Glowforge, however, most cutters can cut thin birch or chipboard (check your cutting machine). In the video I show how i load it into the Glowforge app and send it to the Glowforge. I actually show a video of it cutting.

Step 2 – Cut your wood or vinyl. On the glow forge you need to mask your wood with paper transfer tape to protect from scorching. Also, you can paint your board ahead of time to save on painting later!!!

Step 3 – Once you have your wood or vinyl cut do your weeding. For the Glowforge that means removing the mask from the wood. I found the Gorilla duct tape works amazing!!! You can also use weeding tools, pin pen, etc

Step 4 – Paint your letters. I use the paint pens. They are quick and easy!! I can move pretty fast if I leave them in the board. However, tweezer helps hold it as well while you paint.

Step 5 – Once I painted my letters I then decided what l colors I wanted on my wood disks. I then painted those and set aside to dry. You can do this earlier if you know what color are going to be or if you follow my images!

Step 6 – Glue your letters to the wood. I use Gel super glue. However, they make 3m tape that you can place on the back of the board to make it super easy to put on your wood.

Step 7 – Once everything is attached now we can finish off our ornaments. I used some ribbon that I folded to form the bow and then wrapped twine around them. Pull tight and knot on the back side. Then add a drop of glue to the back of the knot.

Step 8 – Add some beads. I using twine put it through the hole of the disk. I found that using a piece of floral wire works wonders. I you can get a spool from the Dollar Tree. I use the wire like a needle threader. I bend a piece in half. Put my twine in it and then you it to put through the hole of the wood and the beads. When i put the last bead on I put a little drop of hot glue on the twine where the bead will be and then slide the bead over it and held for a second. Tie a knot at the top.

Step 9 – Glue your bow on. You are all done!!!

How to get your FREE Christmas Ornaments File

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 42 – Christmas Ornaments\Wood Slices The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I hope you enjoy the FREE files. Thank you again for stopping by and being part of my dream and 12 Paw Designs! Have an absolutely amazing day!!!

Remember to PIN IT!!! ?

12PD Christmas Ornaments Rounds

Also, please check out my shop. I am always adding new designs.
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
July 17, 2021
Fun With Christmas Sayings and Tags!
For this weeks Christmas in July celebration I have designed and created some fun Christmas Sayings that can be used on holiday tags, cards, signs, etc. I included three holiday sayings multiple options for tags! The project I am sharing with this week is Christmas Wine Bottles. I added vinyl to some and then made tags for others. I hope you enjoy and can’t wait to see what you create!!

This weeks FREE Holiday Sayings and Tags can be found in the Freebie Library. File number is 41. I have also created a video tutorial along with some directions on how I made my bottles and some pointers! Remember to please share what you created! Check me out on Facebook and Instagram and remember a pintrest pin is always appreciated!!

Also, everything in the shop is 25% until Wednesday!!! No code is needed or anything!! The discount will be automatically applied!!! Enjoy!!

Christmas Sayings Supply List
- Cutting Machine and software
- Holiday Sayings and Tags (click on the link)
- Wine Bottle(s)
- LED Wine Bottle Lights
- Adhesive Vinyl in your color choice
- Hot Glue Gun and glue
- Rust-oleum Frosted Glass Spray paint – Walmart or Home Depot
- Christmas greenery and decorations
- Epson salt
- Glitter
- Modge Podge and brush or sponge
- Twine
- Alcohol and cotton pad
- Parchment Paper
- Weeding tools, scissors, cutting knife, transfer tape etc
Video Tutorial – Holiday Sayings and Tags

Here are the steps I took to Christmas Sayings and Holiday Tag Wine Bottles

Step 1 – Spray your bottles with the Frosted Glass Spray paint. I put a glove on and held them by the neck and sprayed them outside. Then i just put them on parchment paper to dry.

Step 2 – If you want to do the snow effect on your bottles lets do that now. First lets mix our epson salt and glitter. I used a small container and put some salt in it and then added glitter. I did this all by look and appeal. Now use your glue gun and applied glue to the bottle. I used some tape to give my bottle a clean edge. Then applied the glue below it. It is easier to stand the bottle up and let gravity help with the drips. Now apply your first layer of epson\glitter. Once that is dry take your modge podge and sponge or brush and pounce over the top of the first layer and fill in your gaps (again check the video for the is). Once they are dry spray your glitter area with a clear sealer. I used Rust-Oleum 2x clear gloss.

Step 3 – Load the free cutting file into your favorite cutting software and size appropriately. For the tags I did you my Glowforge, however, most cutters can cut thin birch on them or chipboard.

Step 4 – Weed your vinyl. Then use your transfer tape to apply it to the vinyl. I did the larger wood first. Then I used parchment paper to align and layer the vinyl since I used two colors. I demo this in the video above.

Step 5 – Now apply your vinyl to the bottle. Lay the bottle on its side. Use your parchment paper to align where you want it to go. Then apply your vinyl. Once the vinyl is laid down carefully remove your transfer tape. If you are doing multiple bottles apply the rest of your vinyl.

Step 6 – Next take your twine and wrap it around the top of the bottle to cover the neck. Use a little hot glue at the top. Put the twine in it and wrap it around the bottle. When looping around over the tail and glue. Keep wrapping until you have the look you want.

Step 7 – Now take the greenery and cut it to the size you need. Put some glue on the bottom part of the twine and then put the greenery in it. Then wrap the twine around again to cover those ends. To finish add your berries and a twine bow or knot.

Step 8 – If you are using tags this is where i added mine. I used twine to tie the ends up. I found it was easier to do the smaller star first and then the larger tag.

Step 9 – Finally take your wine bottle lights. Feed the lights into the bottle. Turn on and enjoy your beautiful creation!

How to get your FREE Holiday Sayings and Tags

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 41 – Christmas\Holiday sayings and tags The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I hope you enjoy the FREE files. Thank you again for stopping by and being part of my dream and 12 Paw Designs! Have an absolutely amazing day!!!

Remember to PIN IT!!! ?

12PD Holiday Sayings and Tag

Also, please check out my shop. I am always adding new designs.
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
July 8, 2021
My Favorite Color is Christmas Lights…
I’m so excited to bring to you Christmas in July!!! I love giving at Christmas so every week in July there will be a Christmas design!!! This week we are doing My Favorite Color is Christmas Lights. The free files have a regular files and i have setup a Rhinestone template version for you!!! Christmas lights are so bright and beautiful and i love looking at them!!

12PD My Favorite Color is Christmas Lights Rhinestones

This weeks FREE My Favorite Color is Christmas Lights can be used on a shirt, bag, sign, etc and the SVG/Cut files can be found in the Freebie Library. File number is 40. I have also created a video tutorial along with some quick directions below on how I made my shirt and some pointers! Remember to please share what you created! Check me out on Facebook and Instagram and remember a pintrest pin is always appreciated!!

My Favorite Color is Christmas Lights Supply List
- Cutting Machine and software
- My Favorite Color is Christmas Lights (click on the link)
- Rhinestoines – Hot fix
- Magic Flock and Rhinestone Transfer – I purchased mine from Rhinestone World
- Edging painting pad – used with the magic flock to get the Rhinestones into the holes.
- Heat Transfer Vinyl – for the light strand and the non-rhinestone words
- Heat press or Easy Press
- Weeding tools, scissors, cutting knife, etc
Video Tutorial – Christmas Lights Rhinestones

Here are the steps I took to make my Rhinestone Shirt

Step 1 – Now load your free file into your cutting software and cut out rhinestone templates from the magic flock. Remember not to re-size if you are doing rhinestones because it will affect the template. Make sure your cut settings are appropriate for your cutting machine. Weed your flock. I pulled the template off first. Important thing is that you want to keep the back down on something. So since i didnt have any vinyl backing left I used the backing from the magic flock. So i had to remove all the little dots. They are sticky and it took me a little bit.

Cutting notes….I used weeding boxes around my lights. So each light color was a separate flock template. For the words I did O O from color in one block and C L R in another. This gave me a great template for lining of my letters and it saved on flock. For LIGHTS I did L G T and I H S in a weeding block. I show this in the video.

Step 2 – Cut your light strand and words out of heat transfer vinyl. I used white since I was going on a dark grey shirt. Remember when cutting your vinyl that the shiney side down to the mat. Weed your vinyl

Step 3 – Let’s press our HTV to our shirt. Find the center of your shirt. I like to fold my in half and give a quick few seconds press. Once you have your fold lay the shirt down on the press. Now find the center of your HTV. I like to fold it in half. Once that is done put it on the shirt and press. Make sure you follow the temp and time that the vinyl recommends. Remove your transfer sheet.

Step 4 – Lets do rhinestones!!! I did this right at the press. I used a piece of parchment paper under the rhinestones and magic flock. It helped to make sure things did not stick where I did not want it to. Pour your stones on the flock and use the pad to move them around to fill the holes. Confirm all holes are filled and that they are going the correct direction. Then take your transfer tape and lay it over the rhinestones and press firmly to make sure all stones adhere. Carefully pull the transfers and stones from the template and put the white back on the transfer tape and rhinestones. I did all of one color at a time. So did red light bulbs and then the letters. Then i put the transfer tape over the letters and set them to the side. Press each color light to the shirt. I used the PNG file as my visual to make sure I had the lights in the correct location. Press. I did not press the full time. Just enough to get the stones to stick t the shirt. I did a full time press at the end. Repeat the process for all other colors.

Once the lights are all on I then pressed the words to the shirt.

IMPORTANT note!!! Once you’re done with your rhinestones separate the front and back of your shirt. The stones will try and glue through to all layers!!!

Enjoy your beautiful shirt!!!

How to get your FREE Christmas Lights Files

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 40 – My Favorite Color is Christmas Lights The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I hope you enjoy the FREE files. Thank you again for stopping by and being part of my dream and 12 Paw Designs! Have an absolutely amazing day!!!

Remember to PIN IT!!! ?

12PD My Favorite Color is Christmas Lights

Also, please check out my shop. I am always adding new designs.
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
July 1, 2021