Category: Glowforge

If the Witches Shoes Fits
I love decorating with Witch legs and Witches Shoes during Halloween. It just reminds me that the Witch Is In! So I designed some fun shoes and leg patterns to help you decorate. Then add in some fun sayings: The witch is in, Don’t Make me Drop a House on you and You Say I’m a Witch like it’s a Bad Thing and you are sure to have some whimsical fun options to decorate with or wear!

Witches Shoes can be used on a shirt, a trick or treat bucket, sign, etc. I made an acrylic glitter tumbler with the files. There are so many possibilities.

This weeks FREE Witches Shoes PNG/SVG/cut file can be found in the Freebie Library. File number is 55 (remember the password is always in the bottom of your weekly email from me). I have also created a video tutorial along with some directions (a lot of don’t 😉 ) below on how I made this tumbler. I can’t wait to see your projects!!

Remember to join our Facebook Craft Group!!!

I am so excited to let you know that I started a Facebook Craft Group. The goal of the group is to welcome ALL crafters. I craft in different mediums, styles and type. Wood, vinyl, paint, sublimation, tumblers, etc. No matter what you do this group is for you. Come and join us!!! Click the link! Crafty Paws for All Cricut Silhouette Glowforge Sublimation and More

Witches Shoes Acrylic Glitter Tumbler Supply List
- Cutting Machine and software
- Witches Shoes No. 55 (click on the link)
- Vinyl colors of your choice
- Double Wall Acrylic Tumbler
- Drill with ¼” drill bit
- Distilled Water
- Vegetable Glycerin
- Baby Oil is an option – You do not need the water and Glycerin then
- UV Resin and Light
- Glitter – I used a mix of fine and chunky
- Parchment Paper
- Weeding tools, scissors, cutting knife, transfer tape, etc
- Rubbing alcohol
- Cotton pads
- Scrapper
- Plastic mix cup, popsicle stick, gloves
- Syringe or condiment bottle from the dollar tree
Video Tutorial – Witches Shoes Tumbler

Here are the steps I took to make my tumbler

Step 1 – Open the file in your favorite cutting software. Cut vinyl to the size you need for your project.

Step 2 – Take your double wall tumbler and your drill and drill a hole into the bottom. NOTE: Care to only go through the first layer!! Reverse the drill to get it out and keep particles out. Also, make sure you are doing it to the edge of the tumbler to help get the glitter and liquid in,

Step 3 – Mix your glitter up. Now, there is such a thing as too much glitter. When I made my cup I put way to much in and had to work on getting some out. I save you from having to watch that part!

Step 4 – Now add the glitter to the tumbler. Couple of things I found that could be helpful is to tape a “glitter shield” around the cup. Just a piece of typing paper taped. It would help keep glitter spill to a minimum. Then a small funnel would help. I used paper. However, it was not working. So this is were the shield would help and then I did a taping motion to get the glitter in.

Step 5 – Now for the liquid mixture. I started with a vegetable glycerin and distilled water mix. However, because i had too much glitter it was not floating. I ended up working to get some out. I did grab another tumbler and added glitter and the glycerin\water mix and that seem totally fine. Back to my original tumbler…I ran out of vegetable glycerin and thought I would try baby oil. This works too, it is just a slower float. To add your liquid to the tumbler I used a large syringe. However, you could use condiment bottles from the Dollar Tree. Tilt your cup to get the air bubbles out and get as much liquid in as you can. Put your finger over the hole and shake it and tip it to make sure it is the way you like it.

I also added a mica powder to the glycerin\water mix. It tends to sink with the glitter so I don’t think I would do it again. However, it all is about what you like and what you want it to look like. I am sharing things i tried to help you along the way.

Step 6 – Once your tumbler is the way you would like clean off the bottom with alcohol and a pad. Next take your UV Resin and cover the hole. Then put the light over it. Repeat. Make sure the cup sits flat also. I ran my light a few times to make sure it was sealed.

Step 7 – This is something extra I did. Just to make sure the bottom was sealed good. I took and covered the bottom with UV and then added fine glitter. Chunky can cause you issues to get it smooth so stick too fine. Use your popsicle stick, silicone brush, etc and smooth it out. Then again use the light multiple times to make sure it is sealed.

Step 8 – Clean the area of the tumbler where you are going to place the vinyl with alcohol and a pad. Set aside.

Step 9 – Now to weed our vinyl. I then used parchment paper to help me layer my vinyl. I used the mixed leg pattern and did the pattern over the legs. Then layered the legs over the shoes.

Step 10 – Apply the vinyl to the tumbler. Make sure you rub it on well.

Step 11 – Shake and play with the tumbler!!! Enjoy!

How to get your FREE Files

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 55 – Witches Shoes. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I really hope you enjoy Frankenstein. Remember a ? Pinterest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

Witches Shoes

Witches Shoes

Also, please check out my shop. I am always adding new designs.
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• FB Group: www.facebook.com/groups/craftypaw/ – Crafty Paws for All Cricut Silhouette Glowforge Sublimation and More
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
October 8, 2021
Check out this Cute Frankenstein
With Halloween only a few weeks away how about a cute lighted bucket for you front porch? Halloween Frankenstein can be used on the bucket, a shirt, a trick or treat bucket, sign, etc. He is just so Franken cute!!

I made a bucket and then I made a wood sign with the same file. He is so fun and versatile.

This weeks FREE Halloween PNG/SVG/cut file can be found in the Freebie Library. File number is 54 (remember the password is always in the bottom of your weekly email from me). I have also created a video tutorial along with some quick directions below on how I made this lighted bucket.. I can’t wait to see your projects!!

Remember to join our Facebook Craft Group!!!

I am so excited to let you know that I started a Facebook Craft Group. The goal of the group is to welcome ALL crafters. I craft in different mediums, styles and type. Wood, vinyl, paint, sublimation, tumblers, etc. No matter what you do this group is for you. Come and join us!!! Click the link! Crafty Paws for All Cricut Silhouette Glowforge Sublimation and More

Halloween Frankenstein Bucket Supply List
- Cutting Machine and software
- Frankenstein, Number 54 (click on the link)
- Vinyl colors of your choice
- 5 Gallon Bucket w/lid – I purchased mine from Wal-mart
- Lights pod and batteries – I purchased mine from Amazon
- Parchment Paper
- Weeding tools, scissors, cutting knife, transfer tape, etc
- Rubbing alcohol
- Acetone
- Cotton pads
- Scrapper
Video Tutorial – Frankenstein Bucket

Here are the steps I took to make the Frank Buckets

Step 1 – Lets prep our Buckets! Scrape the stickers off the lid and the bucket. I used a scrapper to get mine off. I found if i could lift a section and then get under I could lift the sticker off and remove. Use the acetone and cotton pad to remove any residual parts. Once that is done use the Alcohol and a pad to clean and prep your surface. Set aside to dry. I reused a bucket so this was already done.

Step 2 – Now load your free file into your cutting software and cut it out in your vinyl of choice.

Step 3 – Now to weed our vinyl
- Start with weeding vinyl – I find a pin pen helps to remove the small pieces of vinyl from the center of the words. I also like to use weeding boxes too.
- Apply transfer tape for the face. When I cut my vinyl out I put the hair, stitches and eyes together. Then i could place the rest of the facial features as I wanted.
- Peel off vinyl backing off.
- Now apply the face to the bucket. I did a hinge method. The hinge method is where you take part of the backing away from the vinyl. Apply that half. Then fold over and apply the other half.
- Next apply the nose base and mouth.
- Time for the Eyes and tooth. I used parchment paper to do this part. Apply the transfer tape to the eye balls and pull the backing off. Lay your parchment paper on the bucket. Now line your eyes up. Once you have it where want it. Attach the transfer tape to the bucket. Then lift it up, remove the parchment and lay the eyes and transfer tape down.
- Repeat to do the tooth and nose center.
Step 4 – Assemble and add your light. You could use double sided tape or hook and loop if you want your light to stay in one spot.

Step 5 – Play with the fun lights, I turned my to green for Frank and enjoy!!!

How to get your FREE Files

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 54 – Frankenstein. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I really hope you enjoy Frankenstein. Remember a ? Pinterest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

Happy Fall Pumpkins

Frankenstein, Halloween Frankenstein, So Franken Cute

Also, please check out my shop. I am always adding new designs.
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• FB Group: www.facebook.com/groups/craftypaw/ – Crafty Paws for All Cricut Silhouette Glowforge Sublimation and More
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
September 23, 2021
Happy Fall Pumpkins Sublimation Door Mat
Happy Fall! I love fall! The colors, the cooler nights, the smells, etc. So I am sharing with you my Happy Fall Pumpkins. I am using the files to do sublimation on a door mat. This is the perfect addition to any fall decor.

I printed the design out on my convert to sublimation Epson printer and purchased ink off of Etsy. Then I pressed the image using my 15×15 heat press. I had to do 2 presses to got both halves. Check out the video tutorial to learn more.

This weeks FREE Happy Fall Pumpkins PNG/SVG/cut file can be found in the Freebie Library. File number is 53 (remember the password is always in the bottom of your weekly email from me). I have also created a video tutorial along with some quick directions below on how I made this beautiful door mat.. I can’t wait to see your projects!!

Remember to join our Facebook Craft Group!!!

I am so excited to let you know that I started a Facebook Craft Group. The goal of the group is to welcome ALL crafters. I craft in different mediums, styles and type. Wood, vinyl, paint, sublimation, tumblers, etc. No matter what you do this group is for you. Come and join us!!! Click the link! Crafty Paws for All Cricut Silhouette Glowforge Sublimation and More

Happy Fall Pumpkins Sublimation Mat Supply List
- Sublimation Printer – I converted an Epson WF7720
- Sublimation Ink
- Sublimation Paper. I like A Sub 105
- Happy Fall Pumpkins (click on the link)
- Door Mat – The mat I am using is from Lowe’s
- Butcher Paper or parchment paper
- Lint Roller
- Heat Press
- Heat Tape
- Bonus project – Shirt for sublimation – I used a heather shirt. They normally have a higher polyester count. Also, my shirt is a light blue heather and remember sublimation will pick up that lighter color.
Video Tutorial – Happy Fall Pumpkins

Here are the steps I took to make the Happy Fall Pumpkins Door Mat

Step 1 – Using a sublimation printer, ink and paper, print the PNG file out. There are two different PNG files to choose from. The difference is the big pumpkin. MAKE SURE YOU MIRROR THE PRINT!

Step 2 – Heat up your heat press to 400 degrees.

Step 3 – While the heat press is warming up use the lint roller to clean the mat off. Then put the image on the mat. Use heat tape to tape it down well. I have a 15x15in press so I had to do 2 presses. I also wanted to make sure that the image does not move while moving the mat. So use enough tape to make sure it doesn’t. I also found something to lift the mat side up that was not in the press. The goal is to avoid ghosting images.

Step 4 – Once everything taped down and the press is at 400 degrees. Place a piece of parchment or butcher paper over the image. Press for 60 seconds.

Step 5 – Once the first press is done, move the mat to the other side and press again.

Step 6 – Pull the image off the mat once everything is complete

Step 7 – BONUS – Let’s make a shirt. Take your shirt and place a piece of parchment paper between the layers of the shirt.

Step 8 – Place image on the shirt and tape down and press for 60 seconds. – REMEMBER: when using colored shirt you will pick up a more of a vintage look.

Step 8 – Enjoy!

How to get your FREE Files

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 53 – Happy Fall Pumpkins. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I really hope you enjoyed the Happy Fall Pumpkins. Remember a ? Pinterest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

Happy Fall Pumpkins

Also, please check out my shop. I am always adding new designs.
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• FB Group: www.facebook.com/groups/craftypaw/ – Crafty Paws for All Cricut Silhouette Glowforge Sublimation and More
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
September 20, 2021
Hello pumpkin let’s make you in 3D
Hello Pumpkin! Today I am sharing with you my pumpkin signs that I used to make a 3D Pumpkin. The cutting file comes with Hello Pumpkin, Hey Pumpkin and Blessed for your word choices. These are great addition to a table center piece, your fall decorations or a special gift for a friend.

I make my 3D pumpkins with ovals and round. You can cut them yourself or pick some up at your favorite craft location. I cut my ovals and round, however, to help them stand up I used tumble tower blocks from the Dollar Tree. Then using modge podge to attach leopard print tissue paper to the pump centers.

This weeks FREE Pumpkin Signs SVG/cut file can be found in the Freebie Library. File number is 52 (remember the password is always in the bottom of your weekly email from me). I have also created a video tutorial along with some quick directions below on how I made these fun 3D pumpkins. I can’t wait to see your projects!!

Introducing my Facebook Craft Group!!!

I am so excited to let you know that I started a Facebook Craft Group. The goal of the group is to welcome ALL crafters. I craft in different mediums, styles and type. Wood, vinyl, paint, sublimation, tumblers, etc. No matter what you do this group is for you. Come and join us!!! Click the link! Crafty Paws for All Cricut Silhouette Glowforge Sublimation and More

Hello Pumpkin – 3D Pumpkin Supply List
- Cutting Machine and software
- Pumpkin Sign (click on the link)
- Wood Round and or ovals
- Tissue Paper of choice – I used leopard print from Hobby Lobby
- Paint of Choice – I used orange. However, if I made a trio again I would paint each one different.
- Tumble tower blocks from the Dollar Tree
- Sand paper or sanding block – to prep your wood and sand after applying tissue paper
- Sticks for the pumpkin stems – Check your yard or hobby lobby sells a bag for a few dollars
- Polyacrylic or Modge Podge
- Brushes – get my from the Dollar Tree
- Ribbon
- Glue gun
- Vinyl for words
- Weeding tools, scissors, cutting knife, transfer tape, etc
Video Tutorial – 3D Pumpkin

Here are the steps I took to make the Hello Pumpkin 3D Pumpkins

Step 1 – Give your wood a light sanding. Cut your tissue paper or even napkins to be slightly larger then your oval or circle. Then take your polyacrylic (or modge podge) and put a thin layer on the center wood piece for the pumpkins. Then apply your tissue paper to the poly. layer. Then while smoothing it out apply a thin layer over it. Remember, you do not need a lot.

Step 2 – While the centers are drying paint your other pieces and the tumble tower blogs (these are used to help your pumpkins stand up. You can leave the sides and back unpainted if you would like. If you are planning on doing a trio of pumpkins you can paint your pumpkins different colors.

Step 3 – While everything is drying. Cut out the words on your cutting machine. There are 3 options for you. I also curved them to go on left or right side of the pumpkin. Weed your vinyl. If the words are too small you can always do a reverse weed. Apply your transfer tape to the vinyl.

Step 4 – Glue your pumpkins together. The painted pieces will go behind the pattern piece. I used hot glue. You can also use E6000 to make sure it holds. I used the center piece and one of the back pieces first. Applied my glue and then stood it up on end to make sure it was even on the bottom. Then repeated to add the 3rd piece.

Step 5 – Glue the tumble tower blocks to the back. I glued them up just slightly. I wanted a little tilt. Not much, just a little.

Step 6 – Glue the stick to the top of the pumpkin for the stem.

Step 7 – Apply your vinyl words to the pumpkin(s)

Step 8 – Add some ribbon, jute, raffia, etc to the stem to finish the pumpkin off. You can tie a knot or bow.

Step 8 – Enjoy!

How to get your FREE Files

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 52 – Pumpkin Sign. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I really hope you enjoyed the 3D Pumpkins. Remember a ? Pinterest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

Hello Pumpkin, 3D Pumpkin, Hey Pumpkin

Also, please check out my shop. I am always adding new designs.
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• FB Group: www.facebook.com/groups/craftypaw/ – Crafty Paws for All Cricut Silhouette Glowforge Sublimation and More
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
September 15, 2021
With Fall in the Air lets Make a Sunflower Round
Fall is in the air so I design a pretty Sunflower Round. The Sunflower SVG has three different words you can use. You can also leave the words off and just use the Sunflower.

I made my round with a mix of paint and a wood overlay of the Sunflower outline. However, this can be done with all paint using a stencil or vinyl for the words and sunflower. This is such a versatile project. This would be pretty on a door mat, sign, tote bag, etc. So many options.

This weeks FREE Sunflower SVG/cut file can be found in the Freebie Library. File number is 51 (remember the password is always in the bottom of your weekly email from me). I have also created a video tutorial along with some quick directions below on how I made this beautiful Sunflower Round. I can’t wait to see your projects!!

Introducing my Facebook Craft Group!!!

I am so excited to let you know that I started a Facebook Craft Group. The goal of the group is to welcome ALL crafters. I craft in different mediums, styles and type. Wood, vinyl, paint, sublimation, tumblers, etc. No matter what you do this group is for you. Come and join us!!! Click the link! Crafty Paws for All Cricut Silhouette Glowforge Sublimation and More

Sunflower Round Supply List
- Cutting Machine and software
- Sunflower Round (click on the link)
- Masking Vinyl (like oramask or starmask or mylar
- Prepped MDF board – I cut the sunflower outline overlay on the Glowforge. However, vinyl works too!!!
- Stain or paint of Choice – I painted the round grey and white. The sunflower I used black and then yellow for sunflower
- Sand paper or sanding block – to prep your round
- 18″ Round or round to your size
- Painters tape
- Brushes and Make-up sponges – get my from the Dollar Tree
- Ribbon and floral to finish your round
- Staple gun
- Weeding tools, scissors, cutting knife, transfer tape, etc
Video Tutorial – Sunflower Round

Here are the steps I took to make the Round

Step 1 – Prep your board by sanding it. Find your board center and then use painters tape to mark your line. I then painted the one half grey. I had to mix paint for my grey. I didn’t have anything light enough. I used a heat gun to speed of drying. Once the grey is dry, tape that side off and use white to do the bottom half.

Step 2 – While everything is drying(if needed). Open the SVG file in your cutting software (note: if you have the free version of Silhouette studio you will need the DFX files). Size the sign according to the board you will be working with. Use your masking vinyl or mylar to cut out the sunflower petals. Then cut your sunflower outline in either wood or vinyl.

Step 3 – Once your stencil or mylar is cut do your weeding. Remember you are weeding the parts you will be painting. Mylar is great for making reusable stencils. If you are using vinyl for your sunflower outline weed that now and use transfer tape on the vinyl.

Step 4 – Lay your stencil or mylar on your round. Since I was using a wood over lay I used it to help me line everything up. If used vinyl you can do the same thing, however, use a piece of parchment paper. Remove the backing to the vinyl and then lay it on the parchment so it doesn’t stick. Line everything up and apply the stencil mask or mylar. Note: you can paint outside your lines, I know…it’s ok on this one to go outside the lines. The vinyl or wood will cover it.

Step 5 – Now paint the sunflower leaves. I used a make up sponge. TIP: Light paint and light handed goes a long way. If you put too much paint on the sponge or are too heavy handed you will cause bleeding. I went over my leaves a couple of times. It did not take any extra time and it dries faster this way.

Step 6 – I set my round to the side and painted my Sunflower outline and Hi black.

Step 6 – I then applied the wood to the top of the round. If things don’t line totally back up?? It’s ok. You can always touch up with a little paint. Nobody will notice. I had to “touch” up a few spots myself.

Step 7 – Now to make a bow and add your floral. I used 4 kinds of ribbon for the bow. I cut 2 strips of each about 15″ long. You can watch the video for this portion. I also had a piece of floral wire read to tie off the bow. You could also use a zip tie. So take each piece of ribbon and fold two thirds of it into a loop. Leave a third hanging. Pinch where the loop meets. Then do the same with the next piece of ribbon. Do this until all 8 pieces are looped and pinched in your hand. It should look like a ribbon bouquet at this point. Now take your wire or zip tie and tie it off where you have it pinched. Now fluff. I pulled the tails out to the side and fluff the loops. NOTE: If you dont want to do a pow you could use a larger sunflower in its place and fill in the florals more.

Next take your florals and your staple gun and apply to the round. I used ¼” staples. You are probable wondering why staples vs glue, that is due to heat. I have had florals fall off and I am not a light handed gluer either. I have a North facing door so the heat can get crazy. You could do the glue and then add the staples. If just makes sure that if you are selling your round you dont have to worry about fall off. Once I had my florals I added the bow.

Step 8 – Look how pretty!!!! Enjoy!

How to get your FREE Files

To get your FREE file please go to my Freebie Library, sign in (don’t worry if you are not a member yet, sign up and the password will be emailed to you!!! Also, remember I include it in the bottom of the weekly email too! 😉 ) and download Number 51 – Sunflower Round. The downloaded file will have multiple file options SVG, PNG, DXF (If you have the free version of Silhouette Studio you will need this file) and EPS.

I really hope you enjoyed the sunflower round. Remember a ? Pinterest pin would be so appreciated! I can’t wait to see what you create. Please share with me. You can come back here and add a comment or add one to Facebook too!

Sunflower Round, Sunflower, Sunflower Svg

Also, please check out my shop. I am always adding new designs.
https://12pawdesigns.com/shop/

If you have any questions or run into an issue please let me know!!!

Lorri?
Lorri@12PawDesigns.com

Let’s Conntect!

Want to connect more with 12 Paw Designs???:
• Website: https://12pawdesigns.com
• FB Page: https://www.facebook.com/12pawdesigns/
• FB Group: https://www.facebook.com/groups/809334459761115/ – Crafty Paws for All Cricut Silhouette Glowforge Sublimation and More
• Instagram: https://www.instagram.com/12pawdesigns/
• Pinterest: https://www.pinterest.com/12PawDesigns

DO NOT resell any of the files as digital download or any other form.
DO NOT claim the files as your own.
DO NOT modify and resell the files in any form.
September 9, 2021